Stupid Synterol Questions

xcelbeyond · #1 (**permalink**) 11-10-2001, 03:09 AM

Can anyone give me the real scoop on using Syntherol?

I have read several diferent ways it shoud be taken. I dont want to take too little and not do any good. On the other hand, I don't want to waste it either.

My arms are currently about 17-1/4 to 17-1/2 diameter. My tris are VERY dominant, probably from doing 5 reps on bench press with 335# \./ . My bis are really small, symetrically speaking. I'd really like to get them in the 18" to 19" range, which on a small boned 5'6" frame would be pretty large lol

I figure I'd shoot both bi heads on each arm (while on next cycle: EQ, Cyp, Fina & Winny). Is 1cc per head EOD for 30 days enough?

Now the stupid question: Can I put 2cc in a pin and use it for one arm (two pokes)? It seems like if that's acceptable, why not refill and poke the other arm with same pin?

Now, my gut instinct is to use a new pin for each poke.

Thanks, bros!
xcelbeyond =/

Ry Roid · #2 (**permalink**) 11-10-2001, 04:06 AM

OK, you can do this a few ways. I would mix 1-2ml's w/ your gear shots. Now I would do your bi's 3 times a week if you can for the duration of your course than take off. It should add a good 1-2in on your arms. Sytherol isn't anything to be scared of and if you know what it does everyone would want to use it. Just be safe and don't go overboard.

RY

xcelbeyond · #3 (**permalink**) 11-10-2001, 04:21 AM

using 4 pins rather than 1 or 2?

xcelbeyond =/

Big A · #4 (**permalink**) 11-10-2001, 06:39 AM

This is the way that I found to give you the quickest gains in the shortest amount of time.

1ml/d per muscle for 10 days.
2ml/d per muscle for 10 days.
3ml/d per muscle for 10 days.

Then 3ml per muscle once a week thereafter.

When I say 1ml per muscle, I mean 1ml per muscle head. So if you do biceps, then 1ml in the inner head and 1ml in the outer head, each day. You can even do the brachiallis.

Read my Site Oil post to know how to injet - ie massaging etc.

Regarding the pins, it's up to you. I prefer a fresh pin for every shot so it stays as sharp as possible.

Paul Bunyan · #5 (**permalink**) 11-10-2001, 07:54 AM

I started my first Syntherol shots in the bi's 2 days ago. 3cc per arm. They were sore yesterday but they feel pretty good now.. I used a 25ga pin and the shots were painless. I think the reason my arms were sore is that I've never done shots there before. Don't know why but they were pretty damn easy. PB

Ry Roid · #6 (**permalink**) 11-10-2001, 01:24 PM

But, I don't think anyone should just inject synthol as it is a waste IMO. I think combining it w/ gear is a better option and really stretches the muscle for more growth.

RY

xcelbeyond · #7 (**permalink**) 11-10-2001, 01:53 PM

in my biceps, how deep would it be injected? I was planning on using a 1/2" long, 27g pin (just long enough to get under the muscle fascia) for "just" Syntherol (my BF is around 9% now). So, if I combine Syntherol with AAS I assume the gear needs to go deep IM, with 1" long pin?

I posted results from my just-completed Fina cycle on the Fina board lol .

xcelbeyond =/

Paul Bunyan · #8 (**permalink**) 11-10-2001, 06:03 PM

I did mix some test cyp and deca with my Syntherol. My only concern is whether or not it will bind up my AAS and make them less available. I have some test prop and some laurabolin and some jurox winny that I could use if those are better options. Give me some input Ry. PB

xcelbeyond · #9 (**permalink**) 11-11-2001, 07:16 PM

hopefully for Ry or Mr A for feedback to latest questions

Thanks

Ry Roid · #10 (**permalink**) 11-11-2001, 09:17 PM

No not at all!!! It won't make the gear any less effective and why would it?? People say just use gear w/ no ester like prop, winv, susp etc but, I use sytherol w/ every kind of shot.

RY

Paul Bunyan · #11 (**permalink**) 11-11-2001, 09:27 PM

That was a question that was nagging at me. It will make things much simpler. Yesterday I used some winny with my shots and they went well. I'll try all of the other stuff I have too. PB

davebelone · #12 (**permalink**) 11-11-2001, 09:40 PM

might as well do it all in one shot. 3 shots in one day 1ml each makes no sense. i always put everything in one needle.

Big A · #13 (**permalink**) 11-12-2001, 02:53 AM

Well, you can get away with 1/2" needles for both, although if you alternate with 1" will be best. You do that with just gear, just Syntherol or both.

xcelbeyond · #14 (**permalink**) 11-12-2001, 03:45 AM

This info has been VERY helpful!

I really like to use the 27g, 1-2" long " 'slin" pins whenever I can. It is a lot easier to inject slower, which I believe relieves trauma at injection site and subsequent pain.

Anyone interested, I found an online source for pins (CHEAP). Drop me an e-mail (I hope this isn't a source post. If it is, please cleanit up and sorry).

xcelbeyond =/

Bigbadasian · #15 (**permalink**) 11-12-2001, 07:14 AM

|---[\\\\]>--------- I would'nt go with anything less than 1in in my shots...the trick is to go deep into the muscle. ALso, w/slin pins, i'm not even sure if your 'gear' will go through it...i know the only thing i could get through 'slin pins was tren. I'd go with a 25g/1in...believe me...it's small enuff...