Ripped Mass
Synthetek Muscle Building And Fat Loss Products


Go Back   RippedMass > [RM] Anabolic Forums > Anabolic Discussion forum

Reply
 
LinkBack Thread Tools Display Modes

quad injections...
  #1 (permalink)  
Old 07-18-2002, 05:59 AM
DC DC is offline
Registered User
 
Join Date: May 2002
Posts: 30
Question quad injections...

I was wondering, in a quad injection, how deep should I go? I have 23g x 1" needles. Would those be fine?:help:
Reply With Quote top

  #2 (permalink)  
Old 07-18-2002, 07:17 AM
Registered User
 
Join Date: May 2002
Posts: 166
Hey bro what's up? I use 23g x 1 1/2in and my legs are pretty small. Never had a problem with quad injections. If your legs are really lean 1in would probably be fine but the deeper the better as long as you do not hit bone.
__________________
Doing what others can't won't and probably shouldn't.
Reply With Quote top

  #3 (permalink)  
Old 07-18-2002, 12:39 PM
Registered User
 
Join Date: Jul 2002
Location: at the donut hut
Posts: 24
Or hit a nerve and start twitching

:)
Reply With Quote top

  #4 (permalink)  
Old 07-18-2002, 01:26 PM
Registered User
 
Join Date: Jul 2002
Posts: 89
Shit, as long as your are not fat, 1" is fine. /;
Reply With Quote top

shit man
  #5 (permalink)  
Old 07-18-2002, 03:32 PM
Registered User
 
Join Date: Nov 2001
Location: earth, i think
Posts: 216
shit man

i use 25g 1" for my ass most of the time
so they should be fine for legs


frk/t\
__________________
pain is only weakness leaving your body.
frk
Reply With Quote top

  #6 (permalink)  
Old 07-18-2002, 03:42 PM
Registered User
 
Join Date: May 2002
Posts: 37
Ohh, is that why my F'N leg twiches sometimes! Cause I hit a nerve, damn... it sucks... twitching when the needle's inside you! its happened to me a few times... but to be honest, it wasnt a big deal... i've never been sore for too long after a shot. 1/2 hour after my shot and I've already forgot that I did it
Reply With Quote top

  #7 (permalink)  
Old 07-18-2002, 05:52 PM
DC DC is offline
Registered User
 
Join Date: May 2002
Posts: 30
Would it be okay to inject 3 cc's of enanthate into the quad, because that's what I've got loded in the syringe just waiting to be injected.
Reply With Quote top

  #8 (permalink)  
Old 07-18-2002, 08:26 PM
Registered User
 
Join Date: Jul 2002
Posts: 89
3cc is fine. Quads are the most painful site IMO.
No big deal, but I always hit a nerve or something.
1 minute of ice before helps tons. :help:
Reply With Quote top

  #9 (permalink)  
Old 07-19-2002, 03:26 AM
Registered User
 
Join Date: May 2002
Posts: 166
I would never go more than 2cc per injection site per week. But I would try 3cc and see, maybe you will be fine. What happens when you inject too much is that the oil will leak out of your muscle and into your sub q layer which is you fat layer and your skin will turn red and warm to the touch. No big deal but you just wasted some juice. It happened to me in my shoulders, so you might be fine in the quad, it's up to you. Hope that helps.
__________________
Doing what others can't won't and probably shouldn't.
Reply With Quote top

  #10 (permalink)  
Old 07-19-2002, 06:07 PM
Registered User
 
Join Date: Jul 2002
Location: ireland
Posts: 9
quads are pain free and simple bro , just make sure and aspirate
Reply With Quote top

  #11 (permalink)  
Old 07-19-2002, 06:16 PM
WCP's Avatar
WCP WCP is offline
MODERATOR
 
Join Date: Mar 2002
Posts: 162
Ive never hit a nerve but for some reason or another quat injections although I do them always make me feel queasy.

There is just no way my ass can take that abuse all the time.
Peace,

WCP
__________________
"I am the purist nonconformist, jaded, sub-human terrorist. From flesh to steel, from blood to blade I fight to exist!!"
Reply With Quote top

Quads
  #12 (permalink)  
Old 07-20-2002, 12:52 AM
Registered User
 
Join Date: Mar 2002
Posts: 94
Quads

They are a good site for me. I always use the outer part of the quad. Just stick it straight in that outer quad and inject. I always inject at least 3ccs at a shot and rarely have any pain or problems unless I get too close to the bottom of the quad. Then I get some stiffness and swelling down to the knee.
I rotate sides and just move injection site by a half inch each time either up or down.
Reply With Quote top

  #13 (permalink)  
Old 07-20-2002, 01:19 AM
Registered User
 
Join Date: Oct 2001
Location: In the woods with my ox
Posts: 156
25ga 1" in quads works for me. My only problem is not hitting a blood vessel. I must have alot of them in my quads. Usually hit 2-3cc in the quad without a problem. My dad is an RN and he said 25ga 5/8" will work just fine for a 2cc shot. It takes a little longer using a smaller pin but why punch a bigger hole than necessary.

PB
Reply With Quote top

Re: quad injections...
  #14 (permalink)  
Old 07-24-2002, 01:59 AM
Registered User
 
Join Date: Mar 2002
Location: sticks
Posts: 344
Re: quad injections...

Quote:
Originally posted by DC
I was wondering, in a quad injection, how deep should I go? I have 23g x 1" needles. Would those be fine?:help:
these work fine for me,and even better with 3cc.
__________________
BronSon
UNDERSTAND...my opinions reflect how AAS effects me.they effect everyone different.PROCEED WITH CAUTION
Reply With Quote top

  #15 (permalink)  
Old 07-24-2002, 06:44 AM
rugger's Avatar
Registered User
 
Join Date: Mar 2002
Location: www.anasci.com
Posts: 44
I have posted some decent injections videos on my site.
http://www.anabolicscience.com/vid/
__________________
rugger@ziplip.com
Owner www.anabolicscience.com
anasci::fitness evolves
Reply With Quote top

  #16 (permalink)  
Old 07-25-2002, 07:33 AM
Registered User
 
Join Date: May 2002
Posts: 166
Quote:
Originally posted by Paul Bunyan
25ga 1" in quads works for me. My only problem is not hitting a blood vessel. I must have alot of them in my quads. Usually hit 2-3cc in the quad without a problem. My dad is an RN and he said 25ga 5/8" will work just fine for a 2cc shot. It takes a little longer using a smaller pin but why punch a bigger hole than necessary.

PB
5/8" seems awfully short of a needle to use in the quad. Don't get me wrong, I would love to use that short of needle but I just do not agree with that statement. Sorry bro.
Reply With Quote top

  #17 (permalink)  
Old 07-25-2002, 09:26 PM
buffarat's Avatar
Registered User
 
Join Date: Apr 2002
Location: Midwest-Michigan
Posts: 307
Good stuff Rugger............hopefully people check that out.
Reply With Quote top

  #18 (permalink)  
Old 07-25-2002, 11:52 PM
Moose
Guest
 
Posts: n/a
I think quad injections are my least favorite. But, one of the most important things to remember is to be in a position where your quad (or whatever muscle you are injecting) is as relaxed as possible. This has always helped me inject easier with less pain.

moose
Reply With Quote top

  #19 (permalink)  
Old 07-26-2002, 05:26 AM
Registered User
 
Join Date: Jul 2002
Location: Mitten
Posts: 96
I generally go 25x1" or even 5/8 and have no problems. I really have problems hearing horror stories of guys pushing through scar tissue or having it cut out. Smaller size less scaring Also a relaxed muscle may not always be the best way to go. Got good results from flexing bi's then shooting.:kickass:
Reply With Quote top

  #20 (permalink)  
Old 07-26-2002, 06:20 PM
buffarat's Avatar
Registered User
 
Join Date: Apr 2002
Location: Midwest-Michigan
Posts: 307
I use whatever.......It all feels good to me........Ha Ha Ha. the good thing about pain is it lets you know your not dead yet.
Reply With Quote top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Syntherol - Best Synthol In The World
Synthetek Muscle Building And Fat Loss Products
Learn how to perform Intramuscular Injections, Subcutaneous Injections and How to Inject Synthol

Make Instant Cash Now!
Discuss World Issues. Have your say about Politics, Economics and Social Issues


           


          




All times are GMT +1. The time now is 08:16 AM.


vBulletin skins developed by: eXtremepixels
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
| Home | Register | FAQ | Calendar | Today's Posts | Search | New Posts |

Search Engine Optimization by vBSEO 3.3.2